Polypropylene Plastic Balls
Polypropene is a thermoplastic polymer used in a wide variety of applications including packaging and labeling, textiles, stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes.
Polypropylene is mostly hard and flexible, particularly when copolymerized is with ethylene. Polypropylene is economical, and can be translucent when uncolored but is not as readily made transparent as polystyrene, acrylic, or certain other plastics. It is often opaque or colored using pigments. Polypropylene has great resistance to fatigue and a melting point of 171ºC (340ºF)
Material |
Polypropylene (PP) |
Size |
1mm-80mm |
Grade |
G0-G3 (±0.01-0.05mm) |
Density |
Around: 0.85g/cm3 |
Advantage |
Has good resistance, chemical resistance, low density (density less than water), low water absorption, the highest melting point of the thermoplastic with excellent electrical insulator and low dielectric coefficient, often used for floating capacity requirements, withblood transfusion, level calibration indicator. |
Application |
PP ball is mainly used for transfusion, level calibration indicator. |
POM Delrin plastic balls
POM, characterized by its high strength, hardness, and stiffness to ~40ºC., is intrinsically opaque white, but it is available in all colors. POM has a density of 1.410-1.420 g/cm³.
POM homopolymer is a semicrystalline polymer (75-85% crystalline) with a melting point of 175ºCelsius. The POM copolymer has a slightly lower melting point of 162-173ºCelsius.
Material |
Delrin |
Size |
1mm-80mm |
Grade |
G0-G3 (±0.01-0.05mm) |
Density |
Around: 1.4g/cm3 |
Advantage |
it is similar to nylon, but slightly harder than nylon, slightly larger than the density recommended products applied to the required low water absorption |
Application |
POM ball table and drawer slide device is typically used, bearings, rollers, valves, and electronic apparatus, sailing apparatus. |
PA66 Nylon plastic balls
Material |
PA66( Nylon) |
Size |
1mm-100mm |
Grade |
G0-G3 (±0.01-0.05mm) |
Density |
Around: 1.1g/cm3 |
Advantage |
The nylon has preferably the alkali metal, to adapt to the neutral characteristics of petroleum products and all kinds of chemical products. |
Application |
Used in check valve, light load, the knob pull switch, low-cost, but also for better flexibility requirements, high hardness aspects |
Material |
Teflon Balls-PTFE |
Size |
1mm-320mm |
Grade |
G0-G3 (±0.01-0.05mm) |
Density |
2.1–2.3 g/cm³ |
Advantage |
Based frictionless known material having excellent chemical stability, resistance to corrosion, sealing, high lubricity non-tackiness, electrical insulation and good anti-aging Stamina. Continuous use temperature range of |
Application |
Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument. |
حقوق الطبع والنشر © شركة جيانغشي شينتاو للتكنولوجيا المحدودة | جميع الحقوق محفوظة
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist